WAP121-E-K9-G5

IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Internal antennas optimized for wall, ceiling, or desktop placement

Single-band 2.4 GHz

Antenna gain in dBi : 2 dBi each antenna
Transmitted output power
- 802.11b @ 11 Mbps: 17 dBm
- 802.11g @ 54 Mbps: 13 dBm
- 802.11n @ HT20HT40, MCS15: 13 dBm

10BASE-T/100BASE-TX Ethernet, 12V DC power with support for 802.3af PoE

Up to 300 Mbps data rate (real-world throughput will vary)

Access control : Yes, management access control list (ACL) plus MAC ACL
Secure management : HTTPS
Wi-Fi Protected Setup (WPS) : Yes (soft WPS, no hardware push button)
SSID broadcast : Yes
Rogue access point detection : Yes

WPA/WPA2/WEP

12V, 0.5A DC input, and IEEE802.3af compliant PoE
External 12V 0.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE
Peak PoE power : 6W

FCC class B, CE, IC, Wi-Fi

- Cisco WAP121 Wireless-N Access Point withSingle Point Setup
- Ceiling/wall mounting kit
- User guide on CD-ROM
- Quick-start guide
- Ethernet network cable
- 12V, 0.5A power supply

Management protocols : Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management : Yes
Event logging : Local, remote syslog, email alerts
Network diagnostics : Logging and packet capture
Web firmware upgrade : Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP) : DHCP client
IPv6 host : Yes

Cabling type : Category 5e or better
Operating system : Linux
Up to 16 connected users, or 10 active users.

Wi-Fi Multimedia & Traffic Specification (WMM TSPEC)

0° to 40°C (32° to 104°F)

- 20° to 70°C (- 4° to 158°F)

Operating humidity : 10% to 85% noncondensing
Storage humidity : 5% to 90% noncondensing

Receiver sensitivity
- 802.11b: 11 Mbps @ -86 dBm
- 802.11g: 54 Mbps @ -71 dBm
- 802.11n: 300 Mbps @ -64 dBm