Brand |
CISCO
|
Model |
WAP150-E-K9-EU
|
Standards and Protocol |
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
|
Antenna |
Internal antennas optimized for installation on a wall
Internal Fixed Planar inverted-F antenna (PIFA)
|
Wireless Range |
ระยะทางรับ-ส่งสูงสุด ที่โล่งไม่มีสิ่งกีดขวางประมาณ 50-100 เมตร
|
Frequency Range |
Dual concurrent radios (2.4 and 5 GHz)
|
Wireless Transmit Power |
Maximum antenna gain of 3.61 dBi on 2.4 GHz
Maximum antenna gain of 3.85 dBi on 5 GHz
|
Memory |
256 MB RAM
128 MB flash
|
LED Indicators |
1 x Multifunction LED
|
Interface |
1 x LAN Gigabit Ethernet auto-sensing, with support for 802.3af /at PoE, power port for AC adapter (included)
|
Button |
Reset button, power on/off push button
|
Data Rates |
802.11a/b/g : 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
802.11n : 6.5 to 300 Mbps
802.11ac : 6.5 to 867 Mbps
|
Wireless Security |
WPA, WPA2 : including Enterprise authentication
Access control : Management access control list (ACL) plus MAC ACL
Secure management : HTTPS
SSID broadcast
Rogue access point detection
|
Wireless Features |
802.11n/ac
2x2 multiple-input multiple-output (MIMO) with 2 spatial streams at 5 GHz
2x2 MIMO with 2 spatial streams at 2.4 GHz
20-, 40-, and 80-Mhz channels for 802.11ac
20- and 40-Mhz for 802.11n
PHY data rate up to 1.2 Gbps
802.11 dynamic frequency selection (DFS)
|
PoE |
support for 802.3af /at PoE, power port for AC adapter (included)
IEEE 802.3af Ethernet switch
Cisco Power Injector : SB-PWR-INJ2-xx
AC adapter : SB-PWR-12V/1.5A power adapter in a box
POE power
Peak power: 9.5Watts
|
Environment |
Operating temperature : 0° to 40°C (32° to 104°F)
Storage temperature : -20° to 70°C (-4° to 158°F)
Operating humidity : 10% to 85% noncondensing
Storage humidity : 5% to 90% noncondensing
|
Package Contents |
WAP150 Wireless-AC/N Dual Radio Access Point
Power adapter 12V1.5A
Quick-start guide
Ethernet network cable
|
Work Mode |
Access point mode, WDS Bridging, Workgroup Bridge mode
|
Management / Configuration / Tools |
Multiple-Access Point Management
Single Point Setup
Number of access points per cluster : 4
Active clients per cluster : 120
Configuration
Web user interface : Built-in web user interface for easy browser-based configuration (HTTP, HTTPS)
Management
Management protocols : Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management
Event logging : Local, remote syslog, email alerts
Network diagnostics : Logging and packet capture
Web firmware upgrade : Firmware upgradable through web browser, imported or exported configuration file
Dynamic Host Configuration Protocol (DHCP) : DHCP client
IPv6 host
HTTP redirect
|
Wall/Ceiling Mount |
Multiple mounting options Desktop or Wall
|
- |
Wireless throughput : Up to 1.2 Gbps data rate (real-world throughput will vary)
Recommended user support : Up to 64 connective users, 10 active users per radio
|
Dimension |
(W x D x H) : 13.50 x 13.50 x 3.80 cm |
Net Weight |
0.35 KG |
Package Dimension |
(W x D x H) : 19.00 x 20.00 x 9.00 cm |
Gross Weight |
0.82 KG |
Volume |
3,420.00 cm3 |
warranty |
-
|